Hard oxidized bitumen 105/35 with high penetration index

Home » oxidized bitumen in 25Kg bag carton and drum for roofing coating sealing » Hard oxidized bitumen 105/35 with high penetration index

General description of oxidized bitumen 105/35

Oxidized bitumen 105/35 is high softening point and high penetration index bituminous material which is mostly use in Mediterranean countries and using in road asphalt repair and pavement also isolation and roofing.

Uses of oxidized asphalt 105/35

It is using in the chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing, road construction, pavement ,crack seal and repairmen, civil works, roofing, construction industries; sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating, insulating and impregnating agent, make rubber and plastic products. The blown asphalt 105/35 products are for paving, roofing; also used in asphalt based paints for corrosion protection of metals, in lining public works structures, adhesives in electrical laminates, base for synthetic turf; typical uses for oxidized asphalt 105/35 include roofing, pipe coating, Portland cement pavement, hydraulic applications, paint manufacturing.

Packing of blown asphalt 105/35

The ATDM is manufacturer of blown asphalt 105/35 in various packing including kraft bag, meltable plastic bag, drum and bulk blown asphalt 105/35 from penetration grade bitumen, which is blown by hot air in a controlled process until the desired specification is reached. The ATDM oxidised bitumen 105/35 can be supplied in any grade and are designated by two numbers to indicate the softening point and penetration ranges. The oxidized asphalt grade 105/35 means softening point is 105°c and penetration is 35 desimillimiter is produced in compliance and conformity to ASTM standard and meets the following specification.

Guaranty/warranty of blown bitumen 105/35

ATDM guaranty the quality of blown bitumen 105/35 with arrangement of international inspector to check quality and quantity of the bitumen on each shipment during the loading to vessel and controlling the production by QC team via batch test report before shipping. ATDM guaranty the quality to meet with ASTM/EN 13304:2009.

Analysis of bitumen 105/35

Bitumen 105/35


Test method astm/en13304

Specific gravity @ 25/25 cg



Penetration @ 25 c



Softening point c



Loss on heating(wt) %

0.2 max


Flash point c

250 min


Solubility is cs2(wt) %

99.5 max


Spot test



Our approvals

Hello how can i help you?