Granular per chlorine
Per chlorine which is in granular form by chemical name of calcium Hypochlorite which is solid chlorine is using to disinfection drinking water and pool water also hospital and bleaching.Chlorine is used in many parts of the world to purify water.To make sure that the water is safe, a small residual amount, typically about 1 part per million (ppm), of chlorine is left in the water. It has been found that even this small amount of chlorine can cause fading of chlorine-sensitive fabric dyes. In a typical wash, there is usually enough soil on the fabrics to scavenge residual chlorine and minimize damage to chlorine-sensitive dyes. However, in the rinse the soil levels are greatly reduced, as is the pH, and chlorine-sensitive dyes can ~ fade-after multiple laundering cycles. Chlorine is also more; aggressive to dyes at the lower PH. Thus, fading of fabric colors over time is a result of both the high pH of typical granular laundry detergents and the presence of residual chlorine -~ in the wash and rinse water.
Packaging of Clacium hypochlorite
We are filling the calcium hypochlorite in the form of granule in 25 and 45-kg barrels
Specification of Chlorine
Frequent question and answer regarding usage of Chlorine (Calcium hypochlorite)
How much per chlorine to add to pool per gallon?
The basic balance of per chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water. Pool Size. Before you add the chlorine, you need to know how many gallons of water are in the pool. A round ring pool, 48 inches tall and 15 feet across, holds 4,978 gallons.
How much liquid chlorine for 15000 gallon pool?
It's 1 gallon of liquid chlorine per 10,000 gallons of pool water.
How much chlorine per gallon of water?
The basic balance of chlorine to water is between 1 and 3 ppm, or 0.00013 ounces of chlorine per gallon of water. Pool Size. Before you add the chlorine, you need to know how many gallons of water are in the pool. A round ring pool, 48 inches tall and 15 feet across, holds 4,978 gallons.
What is free chlorine in a swimming pool?
The term, "Shocking” refers to the process of adding chlorine or non-chlorine chemicals to your pool in order to raise the "free chlorine” level to a point where contaminates such as algae, combined chlorine (also known as chloramines) and bacteria are destroyed.
How do you adjust the PH level in a pool?
The most common liquid acid used to lower the pH is muriatic acid, also known as hydrochloric acid. To raise the PH, soda ash (sodium carbonate) is normally used. Sodium bicarbonate (baking soda) should be used to raise alkalinity; it can be used to raise PH only if the alkalinity is low.In case you have more question regarding chlorine please feel free contact us.