Blown asphalt manufacturer and exporter Blown asphalt grades Blown asphalt in various types and grades as I,II,III including low,medium and high softening point with different penetration and hardness.The blown asphalt types including soft grade grade as 75/25 85/25 95/25 90/40 also

Medium curing cutback bitumen MC grades cutback asphalt is simply a combination of asphalt cement and petroleum solvent. Like emulsions, cutbacks are used because they reduce asphalt viscosity for lower temperature uses (tack coats, fog seals, slurry seals, stabilization material). Similar to

Usage of Gilsonite Gilsonite using in heavy traffic area like junction or bus station is using as additive in paving on special location of roads like bus station or signal points and junction. Due curing of pavement because of cold or high temperature, weight of trucks and cars, sun,rain,snow

bitumen coat Bitumen coating compositions having substantially improved application and drying properties and producing coatings of improved properties including resistance to ultra violet rays and alligatoring resulting therefrom, said coating compositions comprising volatile solvent solutions

bitumen 60/70 85/100 90/130 160/220 bitumen 60/70 80/100 85/100 40/50 90/130 and 160/220 is black semi solid heavy hydrocarbon which is the last product of extract tower which by cool down of ambient temperature will convert to solid. With increase of temperature the bitumen will become

Bitumen emulsion Iran bitumen emulsions, usually having a relatively low average particle size, can be continuously and speedily prepared by a process comprising feeding emulsion components into the first of at least two static mixers, arranged in series. The product is passed from the

What is rubber processing oil rubber process oil is an oil composition which has a kinematic viscosity at 100 °C of from 32 to 50 cSt and which contains less than 3%. polynuclear aromatic compounds is employed as a process oil for rubber compounds, especially aromatic rubbers. The process

General description of wax Wax is class of compounds that are melt-able solids near environment temperatures. wax include higher alkane and lipids, typically with melting point above about 50 C , melting to give low viscosity liquids. Waxes are insoluble in water but soluble in organic, non

Lubricant Lubricant produced by ATDM are delivered to worldwide different industries. Lubricant is used for lubrication of gearbox, hot forge molding, open gear, bearing, metal melting furnace, rotating kiln, gasoline engine, diesel engine, gas engine, locomotive, turbine, compressor etc.