Asphalt sealant 85/25 115/15 90/40 85/25 95/25 90/10

Description of asphalt sealant 115/15 90/40 85/25 95/25 90/10 85/25 

Asphalt sealant is produced by air blowing of petroleum residues. The grade of asphalt sealant is designated by two numbers, the softening point and the penetration degree.

Uses of asphalt sealant

Asphalt sealant in the construction of built up roofing as bonding or flood coats, 85/25 asphalt is used on inclines not exceeding 25% slope and 115/15 asphalt is used on inclines not exceeding 50%, and is preferred in high temperature areas due to its higher softening point.

For corrosion resistance for piping coating, steel structures, and in electric cable joint protection and industry.

As joint filling and sealant compound.

As an adhesive of building material.

For sound dampening felts and under carriage sealant in the automotive industry.

Standard of asphalt sealant

Asphalt sealant 85/25 115/15 90/40 complies with the requirements of B.S 3690: part 2, and ASTM D312, Type III & Type IV.

Also comply with the Turkey National Building code (Vol. ll-Ch5) Tables No. 15 & 17.

Containers of asphalt sealant

 85 / 25 in could be in 25kg bag or carton also 180 kg drums.

115 / 15 in approx. 18 kg stretch plastic wraps and carton.

Technical Specifications

Type 85/25:

Penetration at 25 °C :25±5

Softening point: 80-90°C.

Type 115/15

Penetration at 25 °C :15±5

Softening point: 110-120°C.

Scroll to Top