Result Search : mix

Search result for : mix


Iran Gilsonite powder factory to use in drilling and asphalt

Gilsonite Gilsonite created from crude oil after milions of years in high pressure and temprature which is naturally-occurring mixture of bitumen and mineral matter formed by oil seepages in the earth’s crust. Gilsonite in rock form is ...

Manufacturer of cementing additive in oil and gas industry

General description cementing additive in oil and gas Gilsonite in oil and gas well cementing is a highly developed technology. Cement-water slurries, with or without various additives, have been used for many years in cementing procedures ...

Gilsonite seller for seal coat asphalt crack sealer

Gilsonite is asphalt crack sealer Crack sealer produced by blend of bitumen with SBS, Gilsonite, rubber process oil, crumb rubber in special temperature and pressure and using as sealing cracks and joints for the asphalt pavement and parking also ...

Natural asphalt producer for drilling and asphalt additive

Natural asphalt Natural Asphalt deposited in Gilane Gharb,Kuhdasht and Ilam -Iran have been known since 1940s and it is the only natural asphalt deposits area in the Middle East. The deposits contain 80 to 97 % asphalt content and there is ...

Natural bitumen supplier

Natural bitumen in paint, Ink, coat, asphalt, foundry and construction. Natural bitumen have long been used in the paving of roadways, including high speed automotive highways. It was found many years ago that an asphaltic material occurring ...

Asphaltite manufacturer for paint industry

General description of Asphaltite in paint Asphaltite concrete floor paint is special a black lustrous asphalt to protect and decorate floors in homes and industry, both indoors and outdoors.Asphaltite concrete floor paint is ...

gilsonite manufacturer for foundry propose

General description of gilsonite manufacturer for foundry proposein foundry Gilsonite foundry additive for foundry sand preblends providing reduced smoke and other emissions, the additive comprising a mixture of one part iron oxide, one ...

Bitumen 10/20 heavy traffic grade

Using bitumen 10/20 in modern asphalt Bitumen 10/20 ensures long-term savings because it allows for a thinner pavement design, which uses up to 30% less asphalt than traditional designs, while ensuring extended pavement life.ATDM exporting ...

Manufacturer of Iran straight asphalt bitumen grade 20/30

General description of bitumen 20/30 ADTM bitumen penetration grade 20/30 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical ...

Manufacturer of Iran straight asphalt bitumen grade 30/40

General description of bitumen 30/40 ADTM bitumen penetration grade 30/40 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical ...

Manufacturer of Iran straight asphalt bitumen grade 160/220

General description of bitumen 160/220 ADTM bitumen penetration grade 160/220 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below ...

Manufacturer of Iran straight asphalt bitumen grade 40/50

General description of bitumen 40/50 ADTM bitumen penetration grade 40/50 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical ...

Manufacturer of Iran straight asphalt bitumen grade 50/70

General description of bitumen 50/70 ADTM bitumen penetration grade 50/70 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical ...

Iran bitumen 60/70 manufacturer and exporter

Iran bitumen 60/70 ADTM bitumen penetration grade 60/70 is semi hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below technical ...

Manufacturer of Iran straight asphalt bitumen grade 70/100

General description of bitumen 70/100 ADTM bitumen penetration grade 70/100 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below ...

Producer of Iran bitumen 80/100

General description of bitumen 80/100 ADTM bitumen penetration grade 80/100 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below ...

Manufacturer of Iran straight asphalt bitumen grade 85/100

General description of bitumen 85/100 ADTM bitumen penetration grade 85/100 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below ...

Manufacturer of Iran straight asphalt bitumen grade 90/130

General description of bitumen 90/130 ADTM bitumen penetration grade 90/130 is hard penetration grade bitumen using as paving grade bitumen suitable for road construction and repair also for the production of asphalt pavements with below ...

Cutback bitumen slow curing SC 30

General description of cutback asphalt SC 30 Cutback bitumen SC30 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Cutback bitumen slow curing SC 70

General description of cutback asphalt SC70 Cutback bitumen SC70 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to reduce ...

Cutback bitumen slow curing SC 250

General description of cutback asphalt SC250 Cutback bitumen SC250 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Cutback bitumen slow curing SC 800

General description of cutback asphalt SC 800 Cutback bitumen SC800 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Cutback bitumen manufacturer in various grade of slow curing

Cutback bitumen slow curing SC The invention relates to bitumen cutback , in particular to the use of fatty acid esters as bitumen cutback agents. These bitumen cutback agents may also be described as cutters,cutback additives,bitumen solvents, ...

Manufacturer of cutback bitumen MC 30

General description of cutback asphalt MC 30 Cutback bitumen MC30 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen medium curing MC 70

General description of cutback asphalt MC 70 Cutback bitumen MC70 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen medium curing MC 250

General description of cutback asphalt MC250 Cutback bitumen MC250 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen medium curing MC 800

General description of cutback asphalt MC 800 Cutback bitumen MC800 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen medium curing MC 3000

General description of cutback asphalt MC 3000 Cutback bitumen MC3000 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen RC 30

General description of cutback asphalt RC 30 Cutback bitumen RC30 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Manufacturer of cutback bitumen RC 70

General description of cutback asphalt RC 70 Cutback bitumen RC70 is dissolved of bitumen in solvents of kerosene. In many countries kerosene and other volatile petroleum derived products are added as a cutter or cutback agent to bitumen to ...

Scroll to Top