TDAE
General description of treated distillate aromatic extracted(TDAE)
TDAE is a green rubber oil (natural friendly oil) with a high aromatic content, environmental protection, non-toxic, and non-carcinogenic characteristics, that can be used as a substitute for existing aromatic oil.
This environment friendly process oil is used as a softening additive in the process of vulcanization of natural rubber and as a component of rubber compounds. Its high viscosity gravity constant (vgc) leads to the reduction in heat buildup and rotational resistance during the usage of tires. Such characteristics enable our treated distillate aromatic extraction to be used in the production of high-quality tire and rubbers.
Uses of Treated distillate aromatic extracted
Rubber process oil is used in industry ink formulations, isolation manufacturers, automobile tire making factory , rubber manufacturing, shoes , flooring , cable and any other industrial interface.
Packing of Treated distillate aromatic extracted
Rubber process oil is packed in new 180 kg drums, iso tanks, flexi tanks, and bulk shipments. Each 20-foot container takes 80 drums of treated distillate aromatic extracted.
Guaranty/warranty of Treated distillate aromatic
Atdm guarantees the quality of TDAE with the arrangement of an international inspector to check the quality and quantity of the product during the loading to the vessel and control the production by QC by batch test report before shipping. Atdm guarantees the quality to meet with ASTM .
Analyses of product
TEST | TEST METHOD | UNIT | RESULT |
Sp.gr @ 15°C | ASTM D-1298 | kg/m3 | 953 |
Flash Point | ASTM D-92 | °C | 246 |
Congealing Point | ASTM D-938 | °C | 33 |
TAN | ASTM D-974 | mg KOH/gr | 0.12 |
K.Vis @ 40°C | ASTM D-445 | cSt | 549.48 |
K.Vis @ 50°C | ASTM D-445 | cSt | 260.8 |
K.Vis @ 100°C | ASTM D-445 | cSt | 19.65 |
RI@20°C | ASTM D-1218 | 1.5227 | |
RI@67°C | ASTM D-1218 | 1.5113 | |
VGC | ASTM D-2501 | 0.895 | |
Aniline point | ASTM D-611 | °C | 63 |
Refractivity Intercept | AMS140.13 | 1.051 | |
Water Content (Karl Fischer) | ASTM D-6304 | ppm | 412.2 |
Sulphur Content | ASTM D-2622 | %(W/W) | 3 Max |
Carbon Type Distribution | AMS 140.13 | % CA/CN/CP | 23/39/38 |
Content Of PCA Extract | IP 346 | %(W/W) | 2.2
|